# Building OpenCv on Jetson Nano B01

**URL:** <https://forum.opencv.org/t/building-opencv-on-jetson-nano-b01/4069>\
**Category:** Uncategorized\
**Tags:** gstreamer, build, cuda, python, nvidia\
**Created:** [June 28, 2021, 4:52pm UTC](https://forum.opencv.org/t/building-opencv-on-jetson-nano-b01/4069 "2021-06-28T16:52:17Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![Tron777](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.opencv.org/tron777/32/2472_2.png) [@Tron777](https://forum.opencv.org/u/Tron777)\
**Post date:** [June 28, 2021, 6:29pm UTC](https://forum.opencv.org/t/building-opencv-on-jetson-nano-b01/4069/5 "2021-06-28T18:29:20Z")

</div>

Is the Jetson Nano by Nvidia similar to Raspberry Pi Zero by the Raspberry Pi Foundation in terms of board and processor specs? If it is, I installed OpenCV without compilation in this article:

[Installing OpenCV on Raspberry Pi Zero](https://forum.opencv.org/t/installing-opencv-on-raspberry-pi-zero-1-3-w-with-python-picamera/3999)

I have no idea how GStreamer works. But if you’re trying to install OpenCV on the Jetson Nano without compilation, then the above link may give you some commands / ideas to complete installation.

---

_[View the full topic](https://forum.opencv.org/t/building-opencv-on-jetson-nano-b01/4069)._