# How to determine the camera pose based on extrinsic parameters

**URL:** <https://forum.opencv.org/t/how-to-determine-the-camera-pose-based-on-extrinsic-parameters/2732>\
**Category:** Python\
**Created:** [April 12, 2021, 7:04pm UTC](https://forum.opencv.org/t/how-to-determine-the-camera-pose-based-on-extrinsic-parameters/2732 "2021-04-12T19:04:25Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Hans\_HH](https://avatars.discourse-cdn.com/v4/letter/h/ecae2f/32.png) [@Hans\_HH](https://forum.opencv.org/u/Hans_HH)\
**Post date:** [April 12, 2021, 7:04pm UTC](https://forum.opencv.org/t/how-to-determine-the-camera-pose-based-on-extrinsic-parameters/2732/1 "2021-04-12T19:04:25Z")

</div>

Good day OpenCV-Community,

I am currently working on the subject of camera calibration. there is one point that I have not yet understood.

Suppose I have calibrated my camera with N-images on which a checkerboard can be seen in different positions and orientations. After the calibration I get the intrinsic parameters. Furthermore I get the extrinsic parameters rvec and tvec for each image. If I now want to determine the camera pose, which of the different rvec’s and tvec’s should I use?

Do I need to average rvec and tvec to determine the camera pose as accurately as possible?

I hope someone can give me some advice.

---

<div class="post-metadata">

**Author:** ![berak](https://avatars.discourse-cdn.com/v4/letter/b/85f322/32.png) [@berak](https://forum.opencv.org/u/berak)\
**Post date:** [April 12, 2021, 7:29pm UTC](https://forum.opencv.org/t/how-to-determine-the-camera-pose-based-on-extrinsic-parameters/2732/2 "2021-04-12T19:29:32Z")

</div>

> [@Hans\_HH](#):
>
> If I now want to determine the camera pose, which of the different rvec’s and tvec’s should I use?

please be aware, that those poses are only valid wrt camera ↔ calibration board.  
once you finished calibration (and probably (re)moved those, the poses are meaningless)

---

<div class="post-metadata">

**Author:** ![Hans\_HH](https://avatars.discourse-cdn.com/v4/letter/h/ecae2f/32.png) [@Hans\_HH](https://forum.opencv.org/u/Hans_HH)\
**Post date:** [April 12, 2021, 7:56pm UTC](https://forum.opencv.org/t/how-to-determine-the-camera-pose-based-on-extrinsic-parameters/2732/3 "2021-04-12T19:56:44Z")

</div>

Thank you for your advice. But assuming we have multiple cameras and we calibrate them separately, we obtain for each camera the rvec’s and tvec’s for each image. Now i want to use one camera as reference for the other cameras, then i have to calculate the transformation matrices based on rvec’s and tvec’s, or not?
